The combination K-Line/DCAN cables (often called K+DCAN) require an. *So the occasional warning will pop-up about "language variant not matching" or "malfunction possible". The first is to change the Virtual Machine settings from using the VMnet1 adapter to using the VMnet0 adapter (or for later VMware, select Bridged in the options menu), which is the bridge adapter to connect the VMware LAN to the physical LAN on the host computer. Can my external drive with ext3 or ext4 format be connected to my PC and Mac and.
In the Device Manager, it took a bit of time for the cable driver to fully install and finally it appeared as "usb serial port (com3)" so I had to go into properties, then advanced in order to select com 1.Īfter that, I plugged the cable into the car and as mentioned everything seems to work well, or as well as can be expected*. Synology NAS supports mounting virtual drives to access the contents of.Double check in the 'recycle bin' to make sure. Deleting (only) the five installed folders from the C:/ drive can be a little unnerving.When I did the restart, it seemed like Windows 10 decided to install an update and it took a while for it to go through that routine and restart the computer.
Didn't try winkfp or ncsexpert.Įverything went according to the directions as far as I could tell: INPA 5.06 communicates with DME, EGS, Radio, IHKA, and even properly communicates with the MK60_DSC (it ran the ABS pump bleed routine successfully). If Tool32 doesn’t work properly, you may need to register a DLL like so.Ĭlick to expand.Ok, all done and everything seems to work. Because this guide is mainly for people who need me to connect remotely, I only recommend a native Windows 7 or 10 installation. They may work for you stand-alone, but I have seen dramatic slowness and lagging, and flashing failures, when connected remotely. VMs and native Windows on a Mac (boot camp) are not recommended.
10: will work fine for BMW Standard Tools, but has trouble installing BMW Scanner 1.4 device drivers.XP: no longer supported by most software, including Chrome.I find Windows 7 is the best OS for setting up BMW software. Needs to have one free USB port for the K+DCAN cable and at least 5GB free drive space for the software. I recommend to get a cheap used one from ebay and dedicate it to car software use.
The CPU, drive, and display requirements are very low. Any laptop that can run Windows 7 or higher is fine.